Samsung LN-S4692D 46 in. LCD HDTV "power board" Questions

power board was replaced. Any help I can get is appreciated. You are having another problem with the power board...there are some capacitors which are easily replaced to cave you the cost of the board

...power board', is this the same as the CCFL inverter? Thanks again, Rob no usually the power board and the inverter board are different boards. there are cheap brands that are all in one. so if you ...

...power supply board have bad capacitors,that have leakages,that are bulges on it tops and require replacing,that the board,where the power a/c cord plug into it.Check the power supply board anyway ...

...power supply board,that the board,where the power a/c cord plug into it.Check ur power source?Yes,than the tv power supply board is dead.These modern circuit boards design never kill the fuse that ...

...power supply board,that the board,the a/c power cord that go into it.That the power supply board.That board have these parts call capacitors,the board they have these dead capacitors,it have leakage ...

...power supply board problems and might also have the T-CON decoders board problems too.The power supply board,that the board,where the power a/c cord plug into it.The T-CON decoders board,that the ...

...power supply board and system board) After you open you will see the two boards are You see a board that has a socket for the power source. wrote that the board we're looking for (power supply board) ...

...power supply board is dead,that the board where ur a/c power cord go into it.That the power supply board,replaced that board.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power ...

...power board. Check for swollen capacitors . If ok next check buffer boards for burnt ic. With set unplugged unplug power board from sustain boards. Plug back in and see if it turns on. Unplug again ...

...Power Board and found no problems. When I unplugged the Power Board from the Main Board the back light stayed on and never did go off. If plug the Power Board back into the Main Board the back light ...