Maytag MSD2756G Side by Side Refrigerator "put spring back ice maker" Questions

...spring did pop off of the feeler arm. I put it back in place and the ice maker is working. Thanks I have the same problem but when I replave the spring into the hole in the ice maker, the next time ...

...in the door. model csx22grbkww. I changed the module in the door. still problem. spring on bottom of ice tray has possibly come out of place, mine did, putting the spring back in place did the

...put your hands under tray while in operation. One possible problem! Right below the automatic ice maker, there is a white plastic arm that should be fanned out around 30° horizontal. Use your ...

spring will be the hardest part to understand putting back in if you by chance pull the facing off it can jump out of its location giving you hours of fun trying to return to its proper place. The ice

put the handle back up it stops. You need to remove the ice maker and open the front carefully. It has small micro switches inside it and it sounds like one that opens the water control valve is stuck

...after taking out the ice a little silver spring came off. it's not broken, we just can't figure out how to put it back on. i pulled out the manual and it does not show any pictures. can anyone

...Put is back together..... spring on feeler arm has to go into the two little holes. short pin into feeler arm side, long pin into gear that sleeves onto pin.  put back together, hit "reset" and ...

...spring and large hex shaped shaft. heat the large shaft end with a torch and put it back in hot side toward motor until the motor end is not frozen. No torch you can use hot water...but that may ...

spring for water fill. But, I do not think this is your problem. 1.) Your water fill tube my be iced up inside. Using a small screw driver break the ice up in the fill tube. 2.) If this does not solve

...spring loaded bar on the back wall that regulates the ice selection. It was frozen or jammed or something, I had to wiggle it to get it to move freely up and down. Then I put the bin back in with the ...