Maytag MFD2560HES Bottom Freezer French Door Refrigerator "test refrigerator thermistor" Questions

...test code number in the refrigerator display. When a test code has been entered, the displays will flash to confirm the test. Press the HOLD button for 3 seconds to begin the test. For temperature ...

...Refrigerator over 48°F or freezer over 15°F for 3 hours. Run diagnostics and test operation of all components. Both thermistors failed. Run diagnostics and test thermistors and thermistor ...

...test code number in the refrigerator display. When a test code has been entered, the displays will flash to confirm the test. Press the HOLD button for 3 seconds to begin the test. For temperature ...

...Refrigerator on setting 1(warmest) freezer is 14 degrees. thermistors are 32 ohm(defrost) and 30 ohm (bottom of freezer) and the defrost circuit resistance is 22 ohms(proper range)...there are no ...

...refrigerator-service-manuals prem It would be very helpful to have a model number please. The GE profile unit came in may different styles. The model numbers began with PSH, PSR, PSS and were ...

...test. 1: Place the end of the thermistor that is located inside the refrigerator into a glass of slushy water and read the ohms resistance on the plug end which is located on the back of the ...

...test. 1: Place the end of the thermistor that is located inside the refrigerator into a glass of slushy water and read the ohms resistance on the plug end which is located on the back of the ...

REFRIGERATOR MOTHER BOARD PROBLEMS i REPLACED THE MOTHERBOARD AND IT STILL DOSEN'T KEEP THE PROPER TEMPERATURE. It varies from 36 to 45 degrees. Go into the diagnostic mode on your touch display . 1)

...refrigerator will continue to operate on a preset 10 minutes on and 30 minutes off time interval. Solution: Use an accurate ohm meter to test the thermistor. If the thermistor is defective, have it ...

...thermistor passes the test, it's bad. The test only sees if the thermistor is open circuit or grounded. These thermistors can send bad information to board. Replace the freezer thermistor and I think ...