Toshiba DKT-2010 Corded Phone "enter mode 1" Questions

1) Press PROG. 2) Press program no. 61 (headset mode) and then press ENTER or STORE. 3) Press selection no. 0=OFF, 1=ON headset mode and then press ENTER or STORE again. 4) Press EXIT or PROG. YBC (/\

...say vms hunt delayand mode: enter 1 for day mode or 2 for night mode enter line you want to program in 2 digit format (line 1 =01) enter number of rings (2) press feature "00" to logout hope that ...

...mode, the phone line it's fine, I just can't hear the incoming calls To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is). with ...

enter programming mode. Programming mode will turn off automatically after a few minutes of non-use. Dial # again Then To change Time and Date: Depress # (Programming) Dial 55 (YY MM DD W HH MM) Input

1) Press PROG. 2) Press program no. 61 (headset mode) and then press ENTER or STORE. 3) Press selection no. 0=OFF, 1=ON headset mode and then press ENTER or STORE again. 4) Press EXIT or PROG. YBC (/\

...enter program mode Press "#" Press "#" key - "PROGRAMMING" is displayed Dial "55" - the display shows "YY MM DD W HH MM" and then the current date is displayed Enter the new date YY = Last two digits ...

...mode, the language cannot be changed and will remain in the language you?ve previously set.10 Setting the Time/Day : This setting allows you to set the current time and day for the Time/Day stamp ...

...enter the User Programming Mode. I tried pressing #9876 but it did nothing. There are two programming modes. One is User the other is system. for user programming press 3,6,9,hold at same time. For ...

...enter #. You are now in programming mode, enter # 55, enter YY MM DD W HH MM where W= Day of week ( 1=Monday ) and HH MM must be in 24 hour clock format ( 1:00 PM = 1300 ),enter # to save. Good

...enter in setting mode. 2 Use up and down arrows to choose between "12h,and "24h," for 24-hour display. Press the "Enter" button when done. 3 Selet the hours value using the up or down arrow buttons ...