Toshiba 52HM95 52" HDTV Projection Television "turn touch screen back" Questions

on adjust red down just slightly(usually less than 1/8 turn.Since the set will be on TAKE CARE NOT TO TOUCH ANYTHING INSIDE THE SET WHEN YOU DO THIS.IF YOU HAVE QUESTIONS ASK BEFORE YOU TRY THIS. 

...turn back on it will show blue for about 1/2 hr. What could be causing this?? Can the screens be replaced as there is a small black dot right in the middle of the screen that won't come off with ...

...turn it off or go to split screen when I come back the picture is all messed up again and I have to do a touch focus again. I checked the convergence and everything is fine there. When you say messed ...

...turn off. Unplug set and locate and remove lamp. Some of these sets had a lamp (it is in a cartridge like a box) that they covered openings on the housing with a screen like material (like window ...

...turn the tv back on the screen remained balck and it made a hissing sound. Has the tv completely broken or is there anything I can do? you have either a bad flyback, bad HV splitter or a Bad HV lead. ...

...touch ANYTHING write down what the initial setting was. I mean it mister. I think hitting volume down selects an option, while hitting "menu" takes you out of that option and into the area you were ...

...i tryed to touch focus but it comes back as error what should i do plus i have fuzzy pic before that with white lines flickering on the screen is this tv worth fixing Repair the convergence ...

...screen was pink. After Tuning (Manuel Convergence? in front of the tv) i got some colors back.. Its pale not alot of red anymore but watchable for now. When i do touch focus... it says touch focus ...

...the green SCREEN not the green FOCUS and turn the green slightly down.Care needs to be taken as set must be on--do not touch anything else inside as dangerous voltages are present when set is

...turn off the power button by pushing on it. It continues to flash red and the screen stays black with no audio now. Have tried replugging it in and out and even changed power strips in case that had ...