Toshiba 72HM195 72" HDTV "lamp bulb continuity" Questions

...lamp timer. well the bulb blew the next time i turned it on and the status light fashes red. i ordered new phillips bulb and replaced but tv won't power up. status flashes red. did i blow my lamp ...

...lamp getting too hot or is this just a shotty $1700 TV. I HAD THE SAME PROBLEM UNTIL I PURCHASED A MONSTER SURGE PROTECTOR AND THE BULB I HAVE IN NOW HAS LASTED FOR OVER A YEAR WITH LOTS OF HRS ON ...

lamp indicator starts to flash red after a few minutes.. The set dosn't make any noises.. I performed a continuity test on the bulb and did not have continuity, I'm not sure if these lamps are similar

bulb and tried to reset the lamp use time, however it still shows a total of 5176 hours. Model number M52W56 LCD. The picture is dark after changing the bulb. Thanks for any help. there are 2 clocks 1

...replace the complete Lamp Assembly or the Bare Bulb. DIY or get a serviceman. Here is a link that shows how to change or replace the bulb or lamp in Sony KF50WE610. Sony Lamp, Bulb, Installation ...

...bulb,still not turning on-power flashes green then red and lamp light comes on Did you reset the lamp timer? If you replace the lamp and dont reset the lamp timer the TV will continue to display the ...

if it's the lamp ballast only about $100.00 and easy to replace, it's the part underneath the lamp that fires up the bulb. The light engine itself is over $900 to buy and not worth it! I have same T.V

...lamp light continues to flash. The bulb seems to be snapped in fine and the door appears to be properly shut. I did make one mistake. I repalced the bulb while the set was still pluggged in. Not on, ...

...lamp. We took it to a repair shop and they said the motherboard was bad and replaced it. We got it home and it continued to say it had a bad bulb. I just received my new bulb and it continues to say ...

...do I reset lamp timer. I just replaced a bulb? Lamp light continues to blink after replacement. Bulb type is correct. check through the menu for lamp reset or consult the owners manual for