ViewSonic VA912BWB 19" LCD monitor "monitors inverter boards" Questions

...Inverter boards usually are replaced in full - even in a repair shop. There's little demand for board schematics. Next to this the CCFL tube could be broken instead, with the inverter board still ...

...inverter stops working? any advice appreciated Thanks The most prevalent failure on these boards are the transformers and or the ic that controls the frequency of the lamp drive. More times than not ...

...inverter boards? Since you cannot power on the monitor with the power switch on the monitor, then it can be the power supply or the logic board, or the inverter has shorted circuits so it makes the ...

lcd monitor problem screen flickers think its the inverter model is philips briliance 150p4 15'' can ireplace the inverter and where is it situated The inverter board can be in the power supply ...

...inverter board. Normally in lcd monitors you can see three circuit boards. power supply, mother board, and the inverter board. If available then try to replace the inverter board. There are high ...

Hello, I have a viewsonic va712 monitor with no backlight. I think the problem is in the backlight inverter board. Do you have some information about the inverter board ? or the inverter scheme? ...

...inverter boards is defective. first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts if you have any question,please let us know ...

the display is dark The problem is on the backlight of your monitor (a cold cathode lamp) this needs to be replace you can reach the cathode lamp by disassembling back of your screen/monitor. The lamp

When I turn on my monitor it flashes on for a second then the screen goes black, why is it doing this? its the problem of back light supporting inverter board.if its a LCD monitor then only its ...

i have an hp w1907 monitor i start up puter and after about 15 miniuts the monitor goes black i turn the monitor off and about 5 minutes later i turn it back on and works fine for about another 15 ...