WYSE Winterm S30 Network Terminal "reset factory settings" Questions

...Reset the terminal to factory-default property settings* check box (the System Settings Change message displays and you can confirm and follow the instructions provided to reset the thin client). ...

reset the device to factory defaults, (you'll lose your connection settings, network settings, etc) -- but you'll be able to use it again. :) Buy a new monitor, or graphics card. If graphics are built

...that keep reverting back to the factory default settings on their own. I know this is realted to a Flash problem, but does anyone know how to correct this? Thank you. tapping the "G" key upon ...

...reset to factory defaults. This might allow your monitor to work. (I think the default resolution is 800x600) The problem you have is that the terminal might be locked down via the .ini file. So ...

...reset factory default with power on. This is caused by the terminals default display resolution (or the resolution that it was set to in its previous environment). The easiest way to get a display, ...

...a mail to request for password with your products no. Default Password is "Fireport". You can reset terminal to factory setting when you are pressing "G" key during boot. when run come black ...

...reset to factory default on a WYSE thin client 1125se The simplest and most often used method is using Wyse Simple Imager in a PXE setting.  This is how most large enterprises deploy images to ...

...reset factory settings for a Wyse V10L? We tried holding down G and it will not go into reset settings. Thanks! Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" ...

factory reset. If you set a static IP Address, you should be able to PING the L230 from another device on your network, i.e. the server. Please test that. Make sure the static IP address you assign to

...factory reset. You monitor cannot support the frequency that the terminal is set up to display at. You should try hooking up the terminal to another monitor that can support 85Hz, set the terminal to ...