...turn the machine back off and unplug it from the wall. Then go back to the boards. Try unplugging each and every connections on both boards. Just unplug one at a time and plugging it back into the ...
Question about Xerox Office Equipment & Supplies
turn it back on the paper just starts feeding through one after another. Two possibilities; One you have a messed up print job trying to print and when you turn the printer on the job just starts over
Question about Xerox Office Equipment & Supplies
...turn it on and then back off again (remembering to leave it UNPLUGGED from power.) 4. WAIT 60 SECONDS (Very important) 5. AFTER 60 seconds plug it back into the wall and turn it back on. If problem ...
...turn back on all items where on at the time i switched off when trying to turn back on everything went on except the printer is there a fuse i can replace or do i throw it away tks The all-in-one ...
Question about Xerox Office Equipment & Supplies
turn on hp 7150 I had unplugged the power from behind the printer several times with no effect. When I unplugged the transformer end from the wall outlet and plugged it back in the printer turned on..
...turn it on and then back off again (remembering to leave it UNPLUGGED from power.) 4. WAIT 60 SECONDS (Very important) 5. AFTER 60 seconds plug it back into the wall and turn it back on. If problem ...
...Zebra ribbon and see if error is resolved. If none of that works, turn it off, unplug it from power, turn it on while unplugged. plug it back in and turn it back on and see if the error
...unplugged and replugged everything, shut it down and it still will not print!!! (1) Try a power cycle: Try turning the printer off, then unplug the power supply from the printer, then unplug the USB ...
Printer will not turn off. UNPLUG THE POWER CORD FROM THE BACK OF THE PRINTER LET IT SIT FOR 2 MINS UNPLUGGED THEN RECONNECT THE POWER CORD AND TURN THE PRINTER BACK ON. THAT SHOULD REFRESH THE ...
Question about toner Office Equipment & Supplies
...it to reset. Turn it off, unplug it, and leave it unplugged for about 30 seconds and then plug it back in. Turn the machine back on. If it still shows code go to the menu and search for reset
117 questions posted
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions
