...corona wire on page 122.) or The drum unit has reached the end of its life. Replace the drum unit. (See Replacing the drum unit on page 130.) and/or Open the front cover press Clear/Back Press Start, ...
open the front door and fold down the transport unit & the drum is to the left of the developer aunit. There is one screw that hold the drum in, unscrew it and before you pull the drum unit out remove
Question about Xerox Office Equipment & Supplies
...corona wire on page 122.)orThe drum unit has reached theend of its life.Replace the drum unit. (See Replacing the drum unit on page 130.)and/or Open the front coverpress Clear/BackPress Start, then ...
Open front cover clean corona wire". I clean the corona wire again, put the drum unit back in. Then I get the same message "Open front cover clean corona wire". Thanks, John Blankenship
...Open the front cover press Clear/Back Replace New Drum – select “Yes” after the screen will show "accepted" close the front cover and you are good to goand WA LA it worked!! to solve the problem ...
...open it all the way and it should pop loose of the main unit. The corona wire is behind the grid, it is the thickness of a human hair. If it is broken you will need a replacement, if the grid was off ...
corona wire The clean corona wire keeps popping up and when you do clean it the toner always comes up empty. I know that we haven't used that much toner we just purchased it on 7/24/2008' I was ...
...open it all the way and it should pop loose of the main unit. The corona wire is behind the grid, it is the thickness of a human hair. If it is broken you will need a replacement, if the grid was off ...
...corona wire easy, just follow those steps:1) Turn of printer power and unplug all cord including phone cord. 2) Make sure the scanner is closed, then lift open the top cover by its handle. 3) Remove ...
117 questions posted
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions