Xerox CopyCentre C20 Black and White Copier "heating hard rolls" Questions

i replace the receit roll and it doesn't want to print. Either you do not have the paper threaded correctly and it isn't passing in contact with the printhead or the paper roll is upside-down. That ...

Xerox XD125F I have taken out the fuser assembly. I was expecting to see broken teeth on gear. I didn't. However, when I tried to gently turn the gear it would turn hard and didn't seem to be ...

xerox copier model #XC1044 paper will not come out of the pathway, will only copy the first half of the sheet. Is this worth fixing, copier has never been serviced in 11 years! Do I need a new copier?

...hard to say which it is. Dear kazatkins Usually when this problem appears it has a sheet of paper wrapped around the heat roll of the fuser. Open the back of the printer, you should see a black roll ...

copy stops halfway through 1st page My Xereox XC1045 copier will only print half a page. If i turn the power off, it may print one full page, but then will show a jam and only print one half of a page

ERROR CODE E 2 PAPER STOPS HALF WAY THROUGH You most likely have a broken fuser heat roll gear. Look near the rear of the machine and you probably will find it broken laying in the machine. If so let ...

fuser gear xerox I have received the new fuser gear for my xerox xc830 and removed the broken one. What is the easiest way to install the new gear? Thanks again for your help. 1. remove front cover ...