Xerox Phaser 7400DN Laser Printer "open jam clear cover fuser" Questions

...Jam at top cover, open top cover to clear. Usually there's not even paper stuck in any of the printer except for one inch of paper that is stuck after going through the fuser. I usually have to take ...

...Jam At Top Cover; Open Top Cover To Clear (A7) Cause: Media is jammed in the fuser exit area. Solution: Fixed! Did not fix. TRY FIRST (Solutions without parts): 1. Unsupported media. - Load supported ...

Jam O." Remove the jammed document, and open and close the side panel of the copier to clear the error message. Unplug the power cord and plug it back in again if the copier displays a message reading

...Open up the cover and remove all 4 of the imaging units (with the toner cartridge). Also, remove the Fuser. While removing them, look for any bits of paper that may have gotten missed while clearing ...

...Open the machine and look at the jammed copies. Are they clear in the imaging unit areas but not upon exiting the machine? If the image is clear around the drums and imaging unit, then the problem ...

...direction! Thanks in advance! Opening a cover during printing will cause a paper jam. If you do this several times and carefully clear th paper you may be able to isolate the origen of the

...open Close the fuser cover located behind the back cover of the printer. Paper jam Clear the paper jam. See Paper jams and how to clear them on page 85. If the printer does not start printing, press ...

jam and to open the front cover, but there's no jam. I remove the paper tray, open the front cover, it resets and the same thing happens again. This printer has a straight flow through path. * Situate

...Open the jam clear cover. Pull the jammed paper out of the fuser unit. 7. Close the jam clear cover. Close the face-up output tray. If the paper jam still cannot be cleared, for HL-5130 and HL-5140 ...

...jam & back cover open fault The printer feeds paper and then stops with the paper 1/3 the way into the fuser. A fault "back cover open" appears. To clear you have to remove the drum / toner ...