Maytag CWG3100A Gas Single Oven "bake working spark" Questions

working after several attempts. Is there an easy fix or will I have to order a part. Hello, What you need to check is if the spark is strong at the bake burner.To do that remove the oven floor and the

...bake, the bottom element doesnt turn red anymore. instead, it sparks toward the back. i have located the spark, it is on-the-element. since the top works fine, can i replace the top with the bottom, ...

...spark for the bake or broil elements. Can any one help. Thank You! Dave You will need a new igniter module. The igniter module is told to spark by the control panel. There is also a flame detection ...

...working. When baking, the broiling element may come on to assist with preheating or to maintain the oven temperature. When set to bake, if the broiler comes on, but the baking element does not, the ...

...spark Oven was on Now the oven and broiler will not work. Have removed covers and inspected for scorch marks. there are none. check bake and broil elements and breakers Did you have aluminum foil ...

...The bake is seperate from the burner ignition system. You may need a new spark module for the top burners. All burners should spark at the same time even if you are only trying to lite one

...bake burner itself is grounded very good against the range frame. I have put star washers between the burner and frame and tightened very tight, that sometimes helps. Also make sure the holes in the ...

...spark (and make the clicking sound) inside the oven compartment. If those are OK, then check the thermostat, as it could be faulty and preventing the oven from functioning. If you can smell gas when ...

Started my kenmore elite convection oven, sparks seemed to have shot from bottom element, now only bake setting works, the display works , can set all the other settings for oven but no heat You ...

bake feature on oven won't work ignition light glows but flame won't spark. broiler works Hi, The ignitor is not working right and is going bad.... have the repair man replace the ignitor, or DIY.... ...