Question about Ultra Linear Car Audio & Video
...amp. Without the remote wire hook up the amp will not turn on. Reason for this is, the Head Unit tells the AMP to turn on, without the remote connected the AMP is going to do nothing, find the remote ...
...port on the amp. The remote wire turns your amp on when turning ignition on and turns amp off when turning ignition off. This wire needs to be connected as without it, you will drain your
...the remote wire directly to the battery +12 to test it. If it powers on, then you can run the wire to a spst switch somewhere in the car and from the switch to the amp. Check the fuese on the
...remote wire go from the amp to the battery (Which does not have any juice when checked with a tester) or what. Thanks. The Remote wire should connect to the remote turn on lead from you radio(most ...
Question about Rockford Fosgate Car Audio & Video
...WHERE EVER THE GROUND WIRE IS TOUCHING THE BODY OF THE CAR. ALSO CHECK UR REMOTE WIRE ON THE AMP. IF THERE IS NO REMOTE WIRE ON STEREO THEN JUST RUN THE REMOTE WIRE FROM AMP TO THE POWER ON THE ...
Question about Kenwood Car Audio & Video
...Some amps can sense when the car is on or off via the different voltage changes when car is running its likely your jvc has this your other amp doesn't make sure it's 12 volt switched job
...amp works fine in my girlfriends car,and I have switched the reciever.All wiring is correct,and Im not a complete idiot. am I ? Dont answer that but please help with the other question (sorry for the ...
...car it doesnt turn on at all for up to 3 or 4 times. any suggestions? The problem might not be with the amp. You will need to check the "remote" output from your head unit at the amp end using a ...
...fuse possible? have you checked? traced all voltage?take and disconnect remote wire from amp and make short wire from remote to 12v if green light works then u may have bad remote wire or blown
amp zx 300 want turn off when i turn my car off had the remote wiring check dont no what to do Hello pruittdarryl, Does the amp turn off when you remove the remote wire? If it does, then wire a toggle
33 questions posted
Usually answered in minutes!
114 Questions
80 Questions
69 Questions
73 Questions
63 Questions
