Alpine MRP-M450 Car Audio Amplifier "amp cut" Questions

amp cuts out when turned up i've had this amp for a few months, and it ran my two kicker CVR 12's just fine, i could crank it loud and they would sound good, amp would never overheat. but this past ...

...amp; W speakers cut out at high volume Amp cuts out when volume is increased. Seems to be getting worse can only get the dial to about 10 oclock before it starts cutting in and out. Check the ...

amp gain problems Orion hp-4800.... When I cut the radio on I have to twist the gain on the amp back and fourth to make the sound work. I cut the car off and then When I cut it back on I have to twist

Amp cuts out and back on 30 or so seconds!! Volume has no impact My amy cuts completely off, for about 20 to 30 seconds, and then pops back on. I have two separate amps for bass and Mid/High range. ...

amp cuts off I have a Alpine pdx1.1000 on 2 12" db drive platinum series. when the bass hits its cuts off. If I unplug one sub it doesnt cut off and both subs work fine when I plug them in one at a ...

cut off again. idk the sub is mess up but idk you have your sub wired incorrectly. your amp shouldn't get hot unless you're settings are too high or your'e sending too small of an ohm load to the amp.

amp keeps cutting on and off hi i have a 1000 kenwood amp and it keeps cutting on and off when i put a 30 amp fuse in, it blows the fuse but when i put in a 40 amp fuse it plays and once the bass ...

Amp cuts out Sub Woofer Amp cuts out. Power to amp is okay. Amp is well grounded. Trigger wire from dash unit feeding Sub Woofer amp is 12volts. I have checked voltages at amp.all ok. However even ...

amp, and for some reason my speakers which are L7 kickers will play then cut out and play and cut out so you hear the bass for about 5 seconds then it cuts out and then cuts back in please help i dont

overheating & cutting out overheating & cutting out First, check your ground, a bad ground can cause overheating. Also check your power connection to the amp. Also it could be something internal ...