Number plate light bulb replacement WATER GETTING INTO THE TAIL GATE THE FIX 1, CORROSION THE THE PLUG BY THE N/S NOT USE REAR FOG LIGHT 2, CORROSION THE WIRING LOOM PLUG IN THE BOOT N/S 3, CORROSION ...
...the button that you press. Those micro switches sometimes do stick from age due to gunge formed by corrosion, and even the reset button which is exactly the same can also be stuck. Yet the surface ...
...turned to ACC or ON it could also be a bad or poor loose ground connection, make sure there is no corrosion on any of the ground connects and also check the positive connection for good connections ...
...apart completley (be careful and don't force anything out) and look it over for any little bit of corrosion on both sides of the main board. If you do not have the proper chemicals to clean it, you ...
...to each speaker, my suggestion would be to take the speakers out and look at them, see if there is corrosion. or anything. my other question is did you just install a new stereo in your car or did ...
...head unit to hold its memory. If the loss of memory is intermittent, it could be a loose cable or corrosion on the
...it? thank you it is unlikely that just sitting killed your system. over time fuses can build up corrosion in them just like the terminals on your battery. try changing
...Make sure your power wire is secure. Do you get a display? Is the speaker wiring still good? Any corrosion around terminals at the
...power to illuminate the faceplate. Make sure no contacts have been broken, pushed in, or have corrosion. Once they all look good, replace the faceplate and see if it lights up. If not, its an ...
My JVC radio does not tune in Check the antenna is connected to the back of the stereo also check for corrosion were the whip screws in to the base of the antenna.
63 questions posted
Usually answered in minutes!
114 Questions
80 Questions
69 Questions
73 Questions
63 Questions
