Question about Televison & Video
...power. You could put it on a power strip with a switch and turn off the power when you are not using it, but it's likely you will have to set it back up and scan the channels each time you turn it
...a remote on function that will turn on the device with a power up. So, if you have any power interruption no matter how short, the device will turn on. Go through the menus and turn this function
...power supply not getting enough current to turn on your screen. Could be a simple fix as a bad capacitor but not sure? If you can pin point that problem being your power supply, it is some times ...
Question about Humax Televison & Video
turn the power on 3. keep pressing the power + channel buttons on the device (not the remote) keep pressing for 10 to 15 seconds 4. then you will see channel No. ## instead of "boot" 5. keep the power
...the TV? There should be 2 buttons on the remote control that turn on power. One should be for all devices controlled by it and the other for devices you press first and then press that power
...turn the unit on i get c100 message...i turned the unit off at the power and held in the on/off button (as i saw in another forum),and turned power back on.Now all it says it boot.... I've tried ...
lost power Lost power in neighborhood...DVR was NOT on... went out for day...came back power was on in neighborhood... Turned on DVR could not get power to it...nothing happened...all other items on ...
...power,still wont turn on.it was working in august 2008 I have a toshiba tv and it will not turn on. There is a flashing green light that comes on, but there is no picture or sound. My toshiba t.v ...
turn on when you power it up, or does it not turn on at all? What type of receiver do you have? The model number is found on the front panel in the bottom left corner. Check behind the receiver and TV
32 questions posted
Usually answered in minutes!
13 Questions
4 Questions
1 Questions
1 Questions