Question about Arris Televison & Video
not power on while the new software is beinginstalled. Try again in a few minutes.OK.[4] The DCT* may have received a software update andmay not power on while the new software is beinginstalled
Question about Toshiba Televison & Video
sound on tv tv will not power on. red light on switch blinks. power relay clicks, but no picture or sound. tv will not power on. red light on switch blinks. power relay clicks, but no picture or sound
...not be detected. Make sure the power supply connected to the DVR is correct (Try swapping the one used to power the cameras with the one used to power the DVR) If the HDD is still not detected, you ...
...power cord let to not only the new fuse blowing again, but also one of the disc shaped capacitors on the board (it let out a loud spark!). Obvioulsy I need a new board. My question is; is this ...
not power Noticed last night that my fortec machine has not power - tried unpluging and pluging in different sockets - try to by-pass the switch - still not power - any solution fortec machine has not
...power supply not getting enough current to turn on your screen. Could be a simple fix as a bad capacitor but not sure? If you can pin point that problem being your power supply, it is some times ...
Question about Humax Televison & Video
...power + channel buttons on the device (not the remote) keep pressing for 10 to 15 seconds 4. then you will see channel No. ## instead of "boot" 5. keep the power on and now connect all cables and it ...
Question about DISH Network Televison & Video
...power light comes on for 5-10 seconds, then goes off. Will not stay powered up.... Hi t53doc,this is Mike Houston of DISH Network I was reading over your post and see wherethe receiver will not stay ...
Question about DISH Network Televison & Video
not power down, will not read smart, Unit will not power down, will not read smart card, will not respond to remote Try pulling the power plug and leaving it unplugedd for an hour. This will allow all
...not get power to it...nothing happened...all other items on that circuit turned on as usual.. getting NOTHING from DVR...any suggestions??? called DirectTV found the unit was fried!" thanks ...
32 questions posted
Usually answered in minutes!
13 Questions
4 Questions
1 Questions
1 Questions