Hitachi CP-X250 Multimedia Projector "air flow" Questions

...Air Flow'? Nothing is blocking the air flow.... Hi, There is probably dust and dirt blocking the air flow... Use a spray can of dust remover like you would use on your keyboard and blow out the ...

air flow I don't fully understand your question, however air flow issues in projectors are usually caused by clogged air intakes or filters. The remedy is usually to just remove the lamp, and blow the

...air flow After 15 minutes from switching the projector on a massege is displyed saying check the air flow, 2 minutes latter the projector turn itself off. I checked and cleaned the air filter then ...

...air flow" Just over 4 years old in church. We have cleaned air filter, now replaced air filter, switched OFF whisper, max temp around projector 25deg C. Have you any further suggestions other than ...

Page 147 in User Guide, then check for air flow from the output vents. Also, be sure there is no intake or output air restriction - air needs to get under the projector and be able to freely flow out

...air flow sensors in the unit as well which you may have blocked up when you blew out the fans. If those sensors do not detect air flow, the assumption is that there is a fan error. Try removing the ...

...air flow''. what can i do to remove that message? Check Air Flow means that the heat sensor is activated. This message means that the air around the projector is not circulating well... causing the ...

air flow Open the cover. At some ends there will be 'filters', to clean the air entering the projector. If these filters are blocked with dust or lint, air flow will be blocked. Clean any dust

...air flow ". How can i remove this message. There is a menu item which has both the lamp hour reset and check air flow, etc. You must go into the menu and reset the air flow item. MAKE SURE YOU CLEAN ...

...air flow sensor on the projector that will send that message if the air flow is decreased so the projector does not overheat. find the filter and remove it. blow it out with canned air and blow out ...