Hitachi Deskstar T7K250 250 GB Hard Drive "master slave jumper settings" Questions

master / slave on you computer During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS the scroll down

...master slave configurations? If so what jumper setting makes it a slave? During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the ...

...advance for your support. Best Regards, Stéphane PATA drives have the jumper settings printed on the label. With SATA drives there is no master and slave. Just select boot device in the

...unit if it is to use Master, Slave or CS settings Please rate our solutions and if you still have problems please call back for more ideas to help you Thanks Richard Scott Technical Support New ...

...master slave the biggest capacity hard drive will set as master During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up ...

...master with slave ::|::                 slave  :::|:black line between dots is plastic jumpernote the plastic ...

...master and what is slave, depending upon the devices' position on the ide cable. to set the drive to "slave", set the jumper so that it only has 1 pin under it, and doesnt actually jump any pins, or ...

...master or slave/slave. also, if one is set to single drive it will likely bypass the slave drive. Here is the link that will teach you on how set your jumper settings easily from IDE to SATA maxtor ...

...master or slave During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS the scroll down to advanced ...

...DS = Master SP = Spare (Slave) Jumper settings, If you use one id cable with tow devices at that time you should hard disk jumper master & second device slave mode of jumper. hard disk ...