Maytag MMV5000 Microwave Oven "inside panel" Questions

panel inside the door at the top hinge. Just gently pry that loose with a small screwdriver. It will expose the top hinge and you will see how to lift the door out. After the door is removed, you must

...panel at the bottom of the door on my Samsung OTR Model ME21H706MQS. It is completely dead, inside light turns on when the door is opened but no clock and buttons do not respond. When I unplug it for ...

...error Normally this occurs if you have recently cleaned the controle panel and it got wet and the insides of the panel got wet. so what you can do is to take a hair dryer and unplug the microwave ...

...panel. You have screws inside the microwave holding the panel. you have 1-2 at the bottom. You may also have to remove the vent. It has 2-3 screws which will be inside the vent. These can be removed ...

inside right side of the panel and had a burning smell. I stopped the cycle and added a cup of water and it still arched real loud and bright. It looked like it was coming behind a two by 4 inch panel

panel. Once you locate the fuse inside you will need to remove it and test it with a continuity tester to see if it is blown. If it is make sure you replace the fuse with the same amp rating you found

...panel. Inside next to the plug in (power supply) there will be a glass fuse. Look inside the fuse and see if you can see a thin metal wire running across the entire glass tube. If it does not touch ...

...inside the microwave, our got dirty and my husband threw away, Is microwave still good? The ALLUMINIUM FIBER PANEL is to prevent microwaves to erradiate whatever is on the other side, so YES it is ...

...control panel pushed inside of panel so unable to use The keypad control board may have to be changed, also the cavity paint must be replaced with the right type of compound for microwave

...door apart to remove a piece of paper between the two glass panels ? there is a piece of paper inside the glass panels of the microwave that I would like to remove. Can anyone help ? model # ...