Hitachi 50VS69 50" Projection HDTV "new tv lamp doesnt turn" Questions

...TV will turn on, but within one or two minutes the it turns off and the green and red timer-lamp stand by/temp lights flash on and off. Samsung DPL model # HLS4266WX/XAA Version PB01. Most likely ...

...will not turn on, it was new in 2006, it is a 42 inch If its a rear projection TV, the lamp is out. I had the same problem. Sony doesnt make this tv anymore, so you have to order the lamp and

new lamp doesnt light up & the lights on the front take turns cycling on & off & flashing sometimes like the bulb is bad. The hum is gone but I can only totally power the tv down by unpluging it. http

...tv becomes non responsive. I have replaced the lamp with a new one and still have the same issue. I'm now thinking it's the ballast but before I invest any more money, I want to make sure that it ...

...TV flashes, it is time to replace the lamp with a new one (not supplied). Use only a replacement Sony XL-2200U for your TV. Use of any other lamp may damage your LCD projection TV. Contact your Sony ...

...you might as well buy a new tv. on the back you have a door where the lamps are open it and take it out do not touch the lamp itself, it's real easy and will save you a ton of money doing it ...

...TV. Since then it is turning itself off, with no particular pattern. It can come straight on and last for a few seconds, or last the entire evening. Have checked the bulb several times, all ok. Any ...

...also the lamp can still be at fault if the lamp is working, most likely it?s another failed part. Ballast or color wheel, color wheel is new this could the problem with ballast in the

...tv has been nothing but trouble since I bought it new 2 years ago. Any help or advice would be greatly appreciated Thank You Check the Lamp Fan if it is defective Lamp will try to light but will shut ...

...TV ,thats an hour lost on Lamp and its also possiable to receive a defective Lamp even new doesnt mean it works. Lamp Fan if defetive can also prevent lamp from lighting. This happens to protect lamp ...