JVC GR-D350 Mini DV Digital Camcorder "dew point" Questions

...camcorder bag. Also it wont let me load the tape. JVC Model # GR-D350U Camcorder Mini DV Either the dew sensor is defective or there is some condensation inside the unit. Try opening up the unit and ...

...point a hair dryer at it. Keep the hair dryer a bit away from the unit, you don't want to heat it up, just get some warm air inside to evaporate the "dew". If that fails to resolve the problem, the ...

...dew" sensor inside that is preventing the unit from accepting the tape. This is a safety feature to prevent damage to the tape. If there is any moisture inside, the tape will stick to the heads and ...

...Dew Point!!! I have reset it twice with battery removal but the Dew Point reading persists. How do I remedy. Thanks, Arthur the dew point is a calculation based on temp and humidity. no idea what it ...

...dew sensor will be on your left. go to: http://omlets.tripod.com/sharpdew.jpg Then, get a real slim soldering iron with a fine point. Open the tape cover and take the tape out. Get a strong light to ...

dew was detected. All that I did was remove the bottom panel. I played a tape at that point and it worked fine. So if you are planning on disconnecting something, try powering up the camera before you

...dew sensor will be on your left. go to: http://omlets.tripod.com/sharpdew.jpg Get a real slim soldering iron with a fine point. Open the tape cover and take the tape out. Get a strong light to shine ...

...dew sensor will be on your left. go to: http://omlets.tripod.com/sharpdew.jpg Then, get a real slim soldering iron with a fine point. Open the tape cover and take the tape out. Get a strong light to ...

...dew indication is from moisture if you can find any desicant out of pill bottle sometimes in new electronics the desicant can be ractivated by placin in oven at 220 degrees basically above boiling ...

...dew sensor will be on your left. go to: http://omlets.tripod.com/sharpdew.jpg get a real slim soldering iron with a fine point. Open the tape cover and take the tape out. Get a strong light to shine ...