Onkyo TX-SR502 Receiver "output power" Questions

Ad

Question about Audio Players & Recorders

2 Answers

...power output of a speaker RMS stands for Root Mean Square,  this is an average output and is basically the maximum power before the amplifier start distorting.  It is the only really true ...

Ad

Question about Audio Players & Recorders

1 Answer

...power fuse is good, is there one for output? Does the output relay click about 5 sec. after powering on? If it does check if the tape2/tape monitor is on. Check speakers and wiring. Try headphones. ...

Ad

Question about Technics Audio Players & Recorders

1 Answer

Subwoofer: Active or non active? I am told all channels on this amp are rated 100 W output, but do i need to run an active subwoofer or will a non powered sub be ok? Hello Smegboy, Yes, you are right.

Question about Sony Audio Players & Recorders

1 Answer

...play - video goes separately and audio goes to the 2100ES. Turn 2100ES to INPUT for NAD. Turn 2100ES to OUTPUT allocated for power amp. Turn INPUT on power amp to allocation for 2100ES. Turn it

Question about Audio Players & Recorders

1 Answer

...is not powered it will need connecting to an amplifier. If it is powered you will need a line level output either on the amp or the mixer. Many modern amplifiers (and some mixers) have a dedicated ...

Question about Denon Audio Players & Recorders

1 Answer

...power output stage . You can visibly check it if theres a burned resistor on the output amplifier. On the base of the Power output transistor if the voltage is the same as the collector pin it will ...

Question about Audio Players & Recorders

1 Answer

go off: power supply voltages ok; offset nd idle in spec- output relays open. jt :) Power up without the speakers off, if the problem still exist, check output and driver transistors for leek or short

Question about Denon Audio Players & Recorders

1 Answer

...power output section does have some fuses to protect it but sadly these do not appear to be fast enough to stop "one" from damaging the power output stage if you unfortunately short outputs. The ...

output transistors or the power supply. The front right and left normally produce the most sound output and those transistors run hotter than the other channels. If you have the equipment and know how

Question about Philips Audio Players & Recorders

1 Answer

...output to a speaker . However if there is only an audio output - composite signal- then you will need a power amplifier to connect the speakers while the CD player is coupled to the power

Not finding what you are looking for?
Onkyo TX-SR502 Receiver Logo

77 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Onkyo Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

John
John

Level 2 Expert

510 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...