Euro-Pro Shark 80 - 7133 "foot control" Questions

Ad

...foot control I have a Husqvarna Viking Lilly 555 sewing machine. The needle does not move for a second or two when I press the foot control after turning on the machine. Then it will very slowly move ...

Ad

...foot control unit or a presser foot? If it is presser foot, most likely you do not have the correct presser foot for your machine. Search the internet for the "make model presser foot" (substitute ...

Ad

Question about Sewing Machines

3 Answers

Error message F04 Foot Controller Break My baby lock machine is showing code F04 foot controller break but my foot controller is not broken I’ve even tried using different foot controllers that go ...

...Foot control problem? As I am free sewing, the machine slows down in a few seconds, stops. I take my foot off the control and begin. It starts, slows down and stops. Is this a faulty foot control? My ...

foot control by detaching foot control and use stop/start. If stop after a start exhibits same as foot pedal then likely the problem is machine control board else, foot pedal. Could be foot control is

...foot control go under foot and under cap Most cables actually go through a cable hole in the foot control. If you are trying to replace the cable, you will need to take the foot control apart to ...

...foot control. Bring the machine and the foot control to a shop, they can test it to see if it is the control, the wires from the control to the machine, or something else. The control and wiring are ...

Question about Bernina Sewing Machines

1 Answer

foot control, plugged cord into motor, motor runs without foot control. Reconnected foot control, motor runs, clicking foot control has no effect. Any ideas? There is a thing called a suppressor which

...I power on the Brother CS-8060 sewing machine. Hi there Ok . : What does F4 error message mean? A: Foot controller disconnected Q: How to fix F4 error message? A: Plug in the foot controller jack if ...

Question about Janome Sewing Machines

2 Answers

...foot control foot control is resetting properly, is not sticking sometimes it will not start at all when I press foot control suddenly it starts, then when I quit sewing (take foot off foot control), ...

Not finding what you are looking for?
Euro-Pro Shark 80 - 7133 Logo

125 questions posted

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

k24674

Level 3 Expert

8093 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...