top tension. For straight stitch you want 0 stitch width, straight stitch, 3 for stitch length. For zig zag you want turn your stitch width to how wide you want the zig zag, choose zig zag stitch, and
Question about Juki Sewing Machines
the bottom stitching looks like a line and not stitches the top stitching is fine I have cut a piece of material on the bias and stitched on it. When I pull the material on both sides, the top ...
Loose bottom stitches on Singer 1507 The top stitches seem ok, the bottom stitches at very loose. Adjusted the bobbin tension to high, no help. top tension must be adjusted to fix loose stitches of ...
Question about Juki Sewing Machines
the bottom stitching looks like a line and not stitches the top stitching is fine I have cut a piece of material on the bias and stitched on it. When I pull the material on both sides, the top ...
Question about Sewing Machines
...stitch.... the stitches on top of the fabric are wrong After I stitch.... my bottom stitches look great but my top stitches are super loose and almost look like a continuous thread rather than ...
...top stitch will be good for a few stitches, and then the stitches will bunch up or be loose. I have checked the threading of the top and of the bobbin. I tried to go the blind hem stitch, and it did ...
...top bar and length to approx 0.5. Stitch down to bottom marker and again set up ffor the wide bar, do the same amount of stitches as the top, finish with needle down at the outside edge, turn work so ...
Question about Sewing Machines
...top, Stitch length set at 7+ and stitch width set at 4. Stitches irregular and top is almost just thread straight across. Of course the shop where I had it serviced is closed until Monday and I can't ...
Question about Euro-Pro Sewing Machines
...TOP THREAD WON'T STITCH AND WHEN IT DOES IT'S VERY LOOSELY, UNUNIFORMED STITCH AND THEN THE DERN THREAD BREAKS. you have your thread tension too tight that's why it is pulling the bottom stitch all ...
Question about Sewing Machines
top stitch is sloppy,how do I fix that? Is the top thread making a thread mess under the fabric? That usually means the top tension is too loose or the thread is not seated in the tension disk. Remove
28 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions
