...breaking, thread getting tangled) we removed the thin metal thing inside the bobbin case and have had no problems since (over a year now!). I think you might have better luck if you use 40 or 50 ...
Breaking Thread I am free hand quilting, the tension seems to be good and I have finished a third of my quilt. However suddenly the tension seems to tighten up and the top thread breaks. It will pull ...
Question about PfaFF Sewing Machines
thread keeps breaking, I sometimes get big loops of thread on the back of the quilt, and at anything but dead slow speed, it doesn't form any stitches at all. At slow speed the foot is supposed to hop
...the brand of thread. http://www.servicethread.com/blog/stop-industrial-sewing-thread-breaks https://www.superiorthreads.com/education-thread-shredding Machine Quilting Thread Shreds Then ...
Thread breaking Doing free motion sewing the thread breaks continually. I've tried diferent threads and adjusting the tension but the problem persists. I HAVE THE SAME PROBLEM WITH THREAD BREAKING. ...
...thread shredding and breaking when free motion quilting The top thread breaks 1. the needle thread is not threaded properly 2. The needle thread tension is to tight 3. The needle is bent or blunt 4. ...
...thread is breaking on Janome 6600P Have checked bobbin; machine is threaded correctly; have changed needle. Was working fine while quilting 6 lap size quilts The needle thread breaks 1. the needle ...
Question about Sewing Machines
...thread breaking or the bobin thread breaking. It will sew for about a quarter of an inch and then the thread breaks, I have changed the bo I do have a stitch regulator on the machine. I have quilted ...
...thread keeps breaking and I loaded a new needle, checked how i threaded the machine and I am also getting reg stitches and long stitches before the thread breaks...HELP....these are quilts for gifts ...
...thread keeps breaking. I have made sure the darning foot is adjusted correctly, the thread is threaded correctly and that I have the right needle in. What else could be causing this. I free motion ...
97 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions