Question about Janome Sewing Machines
thread is bunching/ knotting/ 'birdnesting' on the underside of the fabric. The bobbin holder is clicking and bouncing around an Every time I sew the thread is bunching/ knotting/ 'birdnesting' on the
...and I end up with this wad of thread. Why is it doing this? check to see if the needle is damaged some sewing machines bunch up on the underside when the thread come off the thread take up ...
underside of the fabric. I have tried figuring it out and every so often the thread stops looping. While sewing on the cg550 singer sewing machine, the upper threads will bunch on the underside of the
Thread Underside Of Sewing Material Bunches Up When You Start To Sew On This Dressmaker Deluxe Sewing Machine Goes 1-1/2" Long Then Jams Machine, How Do I Fix This Problem? Model #swa2000 For a ...
...bunches up the thread on the bottom the cause is the top thread. Make sure the tension dial is on "5". After you thread the machine, put the pressure foot down,(like its resting on fabric, but not on ...
Question about Husqvarna Sewing Machines
...thread on the underside of fabric. hi make sure pressure foot is raised before you start to thread machine ortherwise thread will not slide between tension discs this will cause bunching underside of ...
...underside. What can I do? Thread the machine with different color thread for the needle and the bobbin, then see which color is bunching up.Ill bet it is the top thread. For a comprehensive 5 page ...
Question about Kenmore Sewing Machines
...-- use a heavier-size needle. Or, threads have bunched up and need to be cut to release the machine. Check the underside of fabric for bunching threads in that case -- and adjust your top
...underside bunching up while sewing You are getting a thread mess under the fabric? Frequently, this occurs because the top thread is not fully seated in the tension disk. Install a brand new needle. ...
thread is bunching up on the underside of fabric when sewing Your tension must be wrong. If the top tension is too weak the thread on the bottom is not being pulled through the fabric to form a proper
43 questions posted
Usually answered in minutes!
52 Questions
38 Questions
29 Questions
25 Questions
30 Questions