Question about Sewing Machines
...thread is loose, test sew with a different color top thread. Other typical causes for loose top thread are debris in the hook race, improper threading, or top thread not unspooling evenly
Question about Singer Sewing Machines
...loose. Usually, the looping is the top thread. As a general rule, if the thread problem appears on the bottom of the fabric, it's a top thread issue. If the problem appears on the top of the fabric, ...
Loose upper thread requires the top tension to be increased (higher number). When threading the top thread, be sure to ALWAYS RAISE the presser foot while threading so the thread will seat properly in
top stitch is loose, then you need to tighten the bobbin tension: if the bottom stitch is loose, tighten the top tension. Hope this helps. It could also be the size needle and thread you are using for
...they have some threading diagramsalso youtube has video'sfor a manualsewingpartsonline.comsew4less.coma1sewingmachines.comsince the bottom thread is loose try adjusting the top thread ...
Question about Sewing Machines
...top tension too loose. FYI--be sure to ALWAYS RAISE the presser foot when threading the upper thread so it will seat properly in the tension disks. If the bobbin thread is loose, then the bobbin ...
...one underneath. If you have loops on bottom, the top needs to pull harder (tighten top tension). If you have loose thread on top your top tension is probably too tight and your bobbin thread too ...
...top of fabric nicely...bottom is just loose loops of thread...it's like the bobbin is not sewing...I put 2 different colors in to see...top is perfect...on bottom of fabric I see the needle thread in ...
Question about Sewing Machines
Top side stich looks fine. Bottom side loops are very loose. How to adjust? Looping stitches can be caused by a few different factors. Make sure that your machine is threaded correctly. If the top ...
Question about Sewing Machines
loose?... upper top spool or bottom bobbin? If possible use a different color thread on top or bottom to be sure. If upper thread is not pulling back with take up arm you need to increase upper thread
25 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions