Singer 1748 "bobbin thread laying flat" Questions

bobbin thread isn't laying on top of the bobbin. If you can see the bobbin thread when you look through the plastic lid that fits over bobbin, this could be culprit for sure. Easy fix!! Remove bobbin,

...wrong bobbin is being used or the bobbin case is damaged and vibrating. Take the thread off the machine and the bobbin out, if it sounds noisy with no bobbin then I suspect you need a new bobbin

...thread keeps getting stuck in the bobbin area when I try to sew. It is threaded right, but I can't get it to stop. Any ideas? check these things 1.threaded correctly 2.needle bent -lay needle on a ...

...bobbin thread is correctly routed under the tension spring. There is a small screw on the bobbin case that always you to adjust tension. Be sure you have installed a brand new needle. Remove thread ...

...bobbin thread lays flat on the bottom. We have tried adjusting the thread tension and the bobbin tension, but to no avail. It also looks like something is broken in the bobbin housing. Is this a ...

...bobbin thread lays flat on the bottom. We have tried adjusting the thread tension and the bobbin tension, but to no avail. It also looks like something is broken in the bobbin housing. Is this a ...

...needle must face back. when you put the bobbin in, bobbin in your left hand and the thread must feed from the bottom of the bobbin, drop the bobbin, through the groove and lay the thread to the

...clip my threads after sewing a seam, the top thread pulls right out. Do I adjust the tension on top, or the bobbin tension below, or neither? You need to decrease your top tension to fix this

...thread in the bobbin area try rethreading the machine check to make sure the thread isn't wrapping around the spool pin check the spool of thread to see if the notch on the spool is catching the top ...