Question about Brother Sewing Machines
...machine, keeps beeping. I've cleaned it out and it still continues beeping. Peddle won't work. Beeps even when peddle is unplugged from the machine Beeps usually indicates the machine is set to sew, ...
Question about Singer Sewing Machines
My Futura CE-150 beeps and stops sewing after only a few stitches I just tried my new machine and it will only sew a few stitches when straight sewing before it quits and beeps. This is very ...
...machine then beeps continuously, will not operate and remains beeping until switched off. This suggests to me that your switch is either faulty or the button is stuck in the pressed position. If you ...
Beeping Sewing Machine My Singer model 7422 sewing machine will not sew. It will only beep. I can turn the end knob and it will sew just fine. When I push the pedal it just beeps. HELP Your problem is
singer sewing machine beeps in stead of sew wont sew beeps my machine beeps like that when I neglect to lower the presser foot.
Question about Singer Sewing Machines
...confience stylist beeps four time and won't let me sew When I try plugging the foot pedal into the machine it beeps at me four times and then when I press the foot pedal to start sewing it doesn't ...
...machine is beeping and does not start. It Singer 7463 sewing machine.The machine is beeping and does not start. It runs when I use the bobbin filler. I cleaned the bobbin area, and it still beeps. Is ...
Question about Janome Sewing Machines
manual and totally rethread you machine. Sometimes the beeping means that something is not properly set to sew, ie the bobbinwinder is activated, the presser foot is up, threaded improperly, etc... ..
...beeping at startup. I just recieved my machine yesterday. Ebroidered with it last night. Today when I tried to sew it just beeps five times and nothing works. I have d/c the embroidery unit, raised ...
...beeping every 8 stitches can you solve this .i have changed needles bobbin cases but still doing it but is sewing ok just stops to beep Make sure your thread goes under the plate of the carrusel. If ...
265 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions