Singer 8280 Mechanical Sewing Machine "touch sew bobbin case" Questions

my bobbin casing has come out of my singer touch and sew deluxe zig zag model 645 singer touch and sew deluxe zig zag model 645 There is a sprung retainer to hold the bobbin case in place

...Touch & Sew 7462 - Needle hits bottom of bobbin case The needle hits the bottom of the bobbin case and grinds against the metal. Also the bobbin won't thread. This happened after the material kept ...

Touch & Sew 625 I have a vintage 1966 Singer Touch & Sew 625. There is a clip on the right side of the bobbin case (the manual calls it a position bracket) that retains the bobbin case in position. It

...Touch and Sew Model 758. Is there a way to do the chain stich without the bobbin case cover? Is there a place where i can get this replacement part? Thanks Bev [email protected] You can purchase that ...

...touch sew 750 It won't pick up the bobbin thread. I have changed the needle and made sure it was in correctly, re-threaded, and checked out the bobbin case (it looks ok). The needle goes down and up ...

...touch & sew and my bobbin thread gets knotted up in the bobbin case. Where do I set the tension & where is that located on my machine? Here's a manual for your machine: Singer Golden Touch Sew 630 ...

...Touch and Sew model 626 won't seat properly. Therefore plate covering bobbin case will not slide back into place. Have you had the bobbin case out? If so, remove it again and replace carefully.Or ...

Touch-Tronic 2001. The thread keeps bunching under the fabric.I tried changing tension and have thread the needle and bobbin several times. On many of these machines, the bobbin case gets gouges in it

Touch n sew 778's bobbin case pops out when I try to sew or thread the bobbin. little hook on the upper left side of the bobbin area seems to be stopping the casing from rotating. any ideas? Model: ...

...touch & sew 640 bobbin won't turn bobbin does not move when it is running is the bobbin in the bobbin case correctly?is the bobbin wound correctly?try taking the bobbin out & turning it ...