Singer 7462 Mechanical Sewing Machine "wont stay threaded" Questions

...wont stay threaded threw the neddle My trouble shooting suggestions are: check that the thread is in the thread take up lever eye correctly Is the top tension set too tight, ie should be on 5 Is the ...

needle wont stay threaded when sewing needle keeps comming unthreaded when sewing have thread tails of 4 to 6 inches long & pull the thread back behind the needle before you start sewing

...wont stay in try adjusting tension control until both threads are equal. zigzag is easiest to see if you have it correct If the stitches don't stay in, something is amiss. If you have the owner's ...

needle wont stay threaded as i sew the needle looses the thread try another needle and set the tension a bit higher.

...wont stay in the eye of the needle. I dont get a stich of any kind. Ive changed the needel, cleaned the whole machine good, played with the bobbin and still nothing. Make sure nothing has either ...

...wont stay threaded it seems the needles are hitting the lower looper mechanism. Pull more thread through the needles before beginning to stitch. However, if you believe the needles are hitting, FIRST ...

wont stay threaded. the needle is not going straight up and down but it goes down and gets stuck almost usually a 3-5 inch thread tail is helpful to keep the thread from coming out of the needle &

...wont stay under the tension pin even after I have tightened it and the thread just winds around the spindle. it's possible that your thread guide may be off some & needs to be adjustedor the ...

thread wont stay in needle When you start stitching, you need to old the ends of BOTH the upper and bobbin thread, because if you don't, the upper thread will retract.

...wont stay in the fabric what am i doin wrong needle thread tension worng no thread in the bobbin neeld /hook timing is wrong Install a brand new needle--a damaged/bent needle frequently will not pick ...