Singer 7462 Mechanical Sewing Machine "care model" Questions

...What exactly do you mean? The knob that raises and lowers the feet? If so, I suggest you look at it carefully..even take a magnifing glass to it. There may be thread, or something else stuck in ...

...4-10 by 1/2 nut and bolt pack. Screw the nut all the way onto the bolt. Using needle-nosed plyers, Carefully bend the curved arm slightly, and place bolt into the hole on the top of the needle

...without the brand and model of the machine. If it is an older model machine (mechanical), a drop of fresh, good quality sewing machine oil where the lever pivots may take care of the problem.

...may be missing a screw. Clean and oil carefully looking for small bits of thread and lint. If this doesn't work, take it to an

...How can I replace the spool pin? IF IT WAS PLASTIC /NYLON I HAVE USED A LEFT HAND DRILL BIT AND CAREFULLY DRILL IT OUT USUALLY IT WILL UNSCREW WHILE DOING IT THEN JUST SCREW THE NEW ONE IN ...

...There are 4 screws on the bottom, 2 are under a rubber pad that can just as well be discarded. Be careful opening the 2 halves of the case, since the assembly is spring loaded. Note carefully the ...

...model) under the Crafts category. The silver plate on top of the area covering where you place your bobbin into has screws you need to carefully remove (careful not to loose them!). If you need to, ...

...care of my Singer Model AF360104 Good grief... that is NOT a model number.  That is your serial number.  Old machines didn't have model numbers on the machines.... you just have to ...

model sewing machine, any solutions? Try http://www.fixsewingmachine. com I also suggest that you clean bobbin case. Now, when needle is "stuck", this requires patience and care in "jiggling" the hand

...play Replace the screw. This model has a twist & click bulb. Push in, twist, and pull out. Be careful. If the bulb is quite old, it can be brittle and