Singer 7462 Mechanical Sewing Machine "bobbin case spring" Questions

...bobbin case? I was putting a new bobbin into the bobbin case today, and after doing that and closing the cover on the machine, I pressed down on the foot to make sure the bobbin was drawing thread. ...

...bobbin case for older Super Elna sewing machine Elna Star 62 Sewing Machine Parts / SewingPartsOnline.com https://www.sewingpartsonline.com > ... > Elna Parts > Star 62 (SU) $43.19 Bobbin Case Base, ...

...bobbin case spring on the floor. I checked my bobbin cases, and they all have springs. Is there anywhere else the spring could have come from? Also does the color matter? One of my cases has a blue ...

bobbin case spring fell out How does it set back in properly? You will note the round shape of the spring is some what raised on one side. Insert the spring so that the spring is raised in the Center.

bobbin case is moving out of place everytime I start to sew the bobbin case gets moved out of place and E6 shows up on the display. This doesnt happen when there is no thread in it or when I manually ...

...bobbin case apart.Metal plate on rt. had 3 screws,there was a tiny spring? Now metal plate is lose & bobbin case jumps out of holder.Is that plate supposed to be tight? Do you mean you took apart the ...

...bobbin case shifts. I still have good straight stiches, but is unsure if my decorative stitches should be distorted on the bobbin side. Once I check my re-threading, needles, lint and tension, I look ...

...bobbin case with or without the "no backlash spring" with my PFAFF tipmatic 1019? Both fit. When I use the case with the spring, the bobbin tension is way too tight. If the bobbin cases work, it ...

...bobbin case in your left hand, with your right hand, insert the bobbin with the thread unwinding from the right. Pull the thread through the small slot in the top of the bobbin case, then hold the ...

...bobbin case and it does not help. it sounds like no bobbin thread tension. there should be some resistance when you pull on the bobbin thread. if there is none or too little you may have some lint or ...