Steam Fast SP-660 Iron with Auto Shut-off "circuit boards press" Questions

...circuit for my older Singer Magic Press 4. The old part says: 201762 pc1 WORLDTRONICS WT 3089 This same number, 201762" is also on the bottom of the board. Please advise where I can get new ...

...for my singer esp 2 steam press I am looking for a Circuit board for Singer ESP2 steam press try to look in the web for search your part, or ask to the supplier where do you buy the ironGod bless ...

press has the same problem. Everything works but the steam. I took it apart and found the circuit board has scorch marks. Now I'm looking for a replacement board PCB:DTJ120 My Steam Press (SP-660) the

...good but it still doesn't work, replace the circuit board. probably need new auto shut off board my singer magic press 4 was working and when i was about to finish the last garment it did not turn

...the steam button on the underside of iron handle and no staem. There 's a leaked capacitor in the circuit board. You just have to replace it and it works again. Please visit the following page for ...

...press the button to produce stream is not working. however, the stream buster is working find Sounds like the internal tab attached to the trigger is broken. Unplug unit, let cool. Pry up the rubber ...

...press again. you will need to open up an access plate to gain entry to where the wiring is. the indicator lamps are wired to the same terminals that the element connections are. check for a burnt off ...