...multi-meter to ensure the power is totally off. The capacitor stores power so you will have to discharge it by using an INSULATED screw driver and touching the blade across the terminals. Discharge ...
Question about Goodman Heating & Cooling
...power to the outdoor unit and take off the electrical cover on the outdoor condenser. There should be a part that looks like the pic below. If the top is bulged its a true sign of a blown cap. If it ...
...power off at the fuse box, waiting 5 minutes turning the system back on and spray some water on the vents on the side of the outside condenser. If the fan isnt spining get a twig and spin it in an ...
multi meter.check resistance on motor windings for continutity. check microferets make sure it matches data on capacitor to be good I service HVAC systems pretty regularly as part of my job at a large
...multi-meter, try to turn the fan blades on the motor while the electric is off, it shouldn't have any resistance and if it does, then the motor needs to be replaced. However, there is still a ...
multi meter and put in the "MFD' selection. Before you check any capacitor you have to discharge the the voltage charge it has. Use an insulated handle screwdriver and just place the metel part across
...power the question now becomes whether or not the thermostat is calling for anything (cool or heat if the unit is a heat pump). There should be 24-30 volt available at the small gauge wires feeding ...
188 questions posted
Usually answered in minutes!
250 Questions
146 Questions
109 Questions
64 Questions
59 Questions
