...WM0642HW, No Forced Water Recirculation. ( Discontinued) and how it was preset for fill at the factory made it perform terribly. Only after i adjusted the water level sensor does it perform well the ...
...wm0642hw and I have received the de code and now the door wont unlock. Is there any way to get it open manually and remove clothes and inspect door? did u find an solution for this..i too have the ...
Question about LG Washing Machines
What does it mean when it says PE on my lg wm0642hw washing machine Error pe??? The PE error or fault code indicates that the machine is overfilling with water. This washer is equipped with a water ...
statement i meant to say,if its plugged and cant drain then it wont advance to the spin cycle Hi.Mi WM0642HW washer is not draining water.I took it apart ,checked all hoses ,removed drain pomp,plugged
...WM0642HW front end washing machine. It is not accepting cold water. I would like to fix the problem myself instead of spending the money on a service call. Any suggestions? The most likely cause is ...
...wm0642hw drain hose in front is pluged with sand. When I tried to drain the hose so I could clean the filter I noticed the hose is plugged with sand. How can I clean the hose out. That's a real pain. ...
Question about LG Washing Machines
completes wash cycle hits rinse cycle and water will not drain lg washing machine wm0642hw I have cleaned machine out throughly. Also drained and cleaned lower drain plug and removed the pump filter ...
Question about LG Washing Machines
...wm0642hw front load washer started making loud noise and 'hot' smell when starting spin cycle. Removed silver rear access panel and saw melted gray plastic squished out from under the big silver bolt ...
WM0642HW washine machine that is just over a year old. Recently we have noticed that during a wash cycle, water leaks out underneath the machine. It isn't gushing out, but enough to make a good puddle
Question about Washing Machines
...WM0642HW/01, how do I get the front panel off? It's one of those washers with the controls on the top/back of the machine instead of directly above the door. I've narrowed the problem ...
803 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
404 Questions
243 Questions
245 Questions
