water supply hoses connect to the washer (both hot and cold) were clogged with debris--thus reducing the water pressure in the machine. Good water pressure is needed to "flush out" the detergent, etc.
Question about LG WM Washing Machines
...washer LG wm1832cw do a number of fills/empties/spins to find that the shocks were bad (It was making loud noises on the spin cycle). Apparently there is a way, by pressing a combo of buttons, to ...
...washer.You will see the water level rise to a higher set point than just to the edge of the gray cylinder baffels.I have set mine to fill to the edge of the rubber door seal. I wouldn't go any higher ...
Water level for a front load LG washer? Just got our new LG front load washer. We've never had one before, should I be able to see the water level rising, like at the laundmat or does the water level ...
...LG front loader washer? You cant, water levels are factory set for optimum water efficiency, new machines use a lot less water than older machines, poor wash results are usually caused by over ...
...water on our washer here 'trickles down', too...I guess that is normal...But if you have the same brand, you should know those three gray...things...with the black balls in them? They have holes, ...
...is air leakage in the line of pressure switch. so water level rises to higher level to make required pressure. as water is more in your washer it won't drain properly. the sound is that of air
...water based on the type and volume of clothes in your washer. On a large load, you will see wet clothes, but no water sloshing around. PS. Because the machine uses so little water, make sure you use ...
water in them, washer doesn't seem to be draining properly Can be due to clogging in the drain pump/valve which is not draining off due to the dirt accumulation. remove and clean- back flush to see if
377 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
243 Questions
245 Questions
234 Questions