...front of the machine but it did'nt help. Please help. check ur inlet hoses on the outside of machine, also check the connections inside the panel in back The most common reason for a leak on the ...
...front load washer spin cycle makes alot of noise One of 2 things may be causing the loud noise. Either the rear bearing on the drum has failed and will need to be replaced (very expensive) or the ...
front-loading LG WM2277HW - the drum will not spin - it "attempts" to start - but then will just not move - after some time, I get the error message "LE" - which I understand indicates "motor overload
code OE water is not being drained out during wash cycle when it gets to rinse the water does not pump out because of the OE code. I cleaned the drain filter and checked the drain hose. I think the ...
------------thank you Sounds like the button control is the culprit. Have a qualified LG technician diagnose the problem and it may need to have the display board replaced
...valve Failed control board Failed off balance switch I recommend calling a service technician to diagnose and repair your washer. Hope this helps. Thanks for using
...10 minutes is it expensive to fix? The dryer heater is not working. You will need a technician to diagnose this problem. It is possible that the condensate tube and 2 thermistors are clogged with ...
front load washer drum will not turn Can you hear any noise? It could be the belt which you can check by tipping back and looking from underneath. The belt runs vertically from the motor to the drum ...
...properly and may need to be replaced. This will require a service call from a qualified LG tech to diagnose the
...load of white t-shirts and sox, and got an error code of LE Overload in motor. It is a stacked washer with the dryer ontop so I would need two techs to unplug and diagnose the problem. It is full of ...
377 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
243 Questions
245 Questions
234 Questions
