Question about LG WM Washing Machines
...apart? I cleaned out the drain plug- full of sand, filter clean, but I can't see the actual drain pump to see if something might be Can I get to the drain pump or does the washer need to be torn ...
How do I take apart and clean the air system? Cleaning the turbo steam generator (TSG) on this machine is best left to a qualified technician.
...push down on clip and pull draw out. after this you can clean out all the draw and where the softener compartment is it should come apart. to put draw back in just slot it back in. Hope this
...combo and am wondering where the lint screen is that I should be cleaning. I just moved into an apartment with this unit and figure it's time to clean the lint screen, however I cannot find one. ...
...apart and cleaned it, and wiped the housing for the tray. I notice that the spot where water comes in ( i assume thats what the hole above the tray) is full of gunk. Is there a way to remove the top ...
...Try thinning softner with water. Take draw out and apart. Clean the softener 'tubes'. The compartment uses capillary action to dispense the softener. If there is any build up, it will not
...discharge hose and have made sure house drain is clear. i took the pump out . then took the pump apart , water got past the o ring , where shaft goes into the center. i cleaned out the sludge &
#1The fabric softener dispenser won't drain. Make sure the dispenser is clean and free of debris inside the containers. You may have to take the dispenser apart and clean it out in the sink.
how do you clean the detergent, soup, ... it seems that it is cloged how can i take the whole thing apart and clean it? DIRECTIONS
Then a few screws to take the valve apart. Just slide selenoids off with a flathead screwdriver. Take the rest apart and clean the diaphrams with soap and a small brush or something. I hope this helps
150 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
243 Questions
245 Questions
234 Questions