FE condition. There is aseparatehot and cold valve. (they are the part that the hose screws onto on the machine.)To replace valve, cover comes off machine by removing two screws at the back of the top
...FE condition. There is a separate hot and cold valve. (they are the part that the hose screws onto on the machine.) To replace valve, cover comes off machine by removing two screws at the back of the ...
...FE code is a overflow code. This can indicate a bad pressure switch but more likely just a clogged pressure switch hose. Remove the top of the machine and locate the pressure switch. It will be the ...
...fe You need to check the pressure switch and tube wich you can access from the top of the machine with the top removed. the tube is a rubber pipe which may have fallen of the switch or pressure ...
...FE". When you look into the washer you can see tha there is too much water. Ahetr addressing the error code the water will drain to a normal level and continue the wash cycle. The owner's manual ...
...FE. Does anyone have any suggestions, clues? Has anyone ever had this problem - if so what needs to be done. I have laundry to the ceiling HELP!!! As a temporary workaround, until you repair/replace ...
...FE is diplayed the drain will pump out automatically. "PE" Pressure sensor error. Cause: the sensor switch assembly is out of order. "dE" Door open error. Cause: door not all the way closed, loose ...
...FE condition. There is a separate hot and cold valve. (they are the part that the hose screws onto on the machine.) To replace valve, cover comes off machine by removing two screws at the back of the ...
what does FE code mean? KENMORE TOP LOAD WASHER WITH FE CODE WHAT DOES THAT MEAN?
...FE error code will appear for two reasons 1)overfilling of the unit 2)under filling (proper water level is not met within 8 minutes of fill time). This could be caused by a few different issues. Most ...
327 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
243 Questions
234 Questions
195 Questions