temperature sensor in the machine is faulty and needs to be replaced. TE = "Thermister Error" The thermister sensor is connected to the main control board and relays the temperature of the water to it
thermister error. It is a temperature sensor at the bottom front of the washer. tE can also be caused by a heater error. Some models have a seperate thermister, some incorporate it with the heater. It
...is not list in the manual. Upside down F and E That is a thermister error. Replace the thermister, located at the bottom front of the tub. (It is difficult to do without taking the washer's front
thermister error). The thermister is located right next to or, on some models, is part of the heating element. It is nearly impossible to replace without taking the front off the washer. It is located
te error code is showing which apparently is a control error. Where is the control panel? The thermister temperature sensor of the machine is faulty.
...work fine for weeks or sometimes it will do it all the time. What is causing this to happen? te is a error code for a bad thermister. it senses the temp of water in the tub. this needs to be ...
error code tE tE is a thermister error. (temperture sensor) Located at the water heater element.
When I turn my machine on an FE appears in the error box but the F is upside down. It won't allow me to proceed or do anything. Any solutions out there? One of the thermisters is open.
...Thermister error. It is a temperature sensor located at the bottom of the outer wash tub. Usually located at the front of the outer tub. Very difficult to replace unless you remvove the front panel. ...
...error code it could be the part, Wiring Harness or Computer which is causing the issue. If you try cold temp wash the cycles may work. Geeks should OHM out the part to see if that is at fault. LG has ...
327 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
243 Questions
234 Questions
195 Questions