LG 24 in. LDS 5811 Built-in Dishwasher "black insulation melting back" Questions

...black spray on insulation. You need to free them and check to see if any are broken, if they are cut them, splice them back together. Then insert the wires into a cut bicycle tube and put the door ...

black spray on insulation. If they are you need to free them from this mess and check for any broken wires. Make sure your plug is unplugged if you need to fix the wires, cut them and splice them back

...black tar. The tar stuff melts the shielding on the wires and corrodes the wires. I found 2 wires melted and shorted. I pulled out the wires, stripped and reconnected them and my unit tested fine. I ...

...black insulation and creating this problem again. Thanks for solution . In My case it was the red wire,alongside the gray wire.fixed and used electrician tape. First , there is a three wire plug ( ...

black insulation, when it heats up the wires stick in it and eventually the wires break. The fix is as stated, splice the broken wires together, as well take some of the white insulation and put it in

...black blown in insulation. Carefully free the wires and run a quick check to see if any of the wires are broken. If they are cut them and splice them back together. It takes a while because there's a ...

...insulation between and you should be good. It can be very hard to find the break as it could be internal. What you can do is use some pins and stick them into the wire above and below where it was ...