...reach inside your d/w and jiggle the mushroom shaped float switch located on floor of d/w. should move freely up and down if its stuck up(or something lodged under it your unit wont fill with ...
...dishwasher fills up with a small amount of water, but the main pump never starts. it runs through the cycles, but never sprays water Has it sat for a long time not being used ? some times the pump ...
...sometimes interfere with the proper operation of this sensor. That causes the control to think there is a water leak. When this fault occurs everything is turned off and the drain pump runs ...
...dishwasher models use a belt to drive the pump. Replace the belt if found broken. Note: Sometimes the belt would just come off the pump. Even though it might not be broken, it is recommended that you ...
dishwasher sits unused for a period of time the seals in the motor and pump can get frozen together. Sometimes high minerals in the water also can stick the seals together and the motor cannot turn on
...dishwasher models use a wax motor instead of a bi-metal switch. It's a sealed unit with wax that heats up and pushes a piston through to open the door. The wax motor, controlled by the timer, ...
...dishwasher. We called them and they said the UO stands for Vent Open (the display can't make a V so it makes a U). The active vent was not closing when it should be closed (the repairman said the ...
...dishwasher where if connects to the sink or disposal unit. Look for a clog and clear if necessary. Water exits the machine via the drain pump. If it is not operating the machine will not drain. It ...
176 questions posted
Usually answered in minutes!
236 Questions
209 Questions
140 Questions
116 Questions
106 Questions
