...there is a menu to select a Superset number. Using your stylus or cursor select S then 0 then 1, S01 on the superset menu. This will set the communcations to the correct type. If you are using th ...
Just enough to be irritating. I am running Windows XP pro. Be sure that the Superset Code is set to S01 if this is a RS232 connection
...Is it the software driver that is not compatible with Super L III? First set the Superset Code to S01 on the tablet, if you are using the TabletWorks Driver it should work in your software. Try ...
...Any other tone would indicate a problem. If you get four beeps,try to set the Superset code to S01 by using the stylus,select S,then 0 then 1 and you should hear four beeps again. If this
...your mouse pad on the digitzer pad. Click Apply. This worked for me. First thing to do is select S01 on your superset menu.The menu located on the lower left hand side of your RUD II. Take your ...
...me. It's as if the digitizer is down scaled and it effects the scale as well. Thank you Select S01 on your superset menu first. Check the mapping on the tablet driver control panel and turn it ...
...the cable at different points and check the display on the Quikruler to see if has reset. Select S01 on the superset code with your stylus or cursor. You get get four sucess tones (beeps). If none ...
...peeps with message running self test no digitizer Make sure the Digitizer is set to Superset Code S01, it may also be a bad cable,check all of the cables for wear. These units do go bad
21 questions posted
Usually answered in minutes!
12 Questions
4 Questions
1 Questions