Question about LG GCC Computers & Internet
installing cd-rom i turned computer on and it says i need to change the stand alone slave drive master Hi there, I think that the problem here may be that the Jumper on the CD-ROM needs adjusting. The
jumper settings for samsung dvd drive I'm installing the above as a master to a rom slave - need the jumper settings There should be a diagram on the drive indicating the jumper positions. Good luck!
installing the product below in the second drive bay just below my old CD drive. (I chose to do this because I couldn't get the "blinking" screw out of the CD drive to remove it - yeah, I'm female and
...board you remove the first dvd or cd rom. in the back where you plug in the cables, search for a diagram of master, slave and cable select pin sets. on both of these roms, there will be one. set ...
Question about Lite On Computers & Internet
there According to the product number, that is an IDE drive. It must be configured as either a Master or Slave drive via the jumper pins on the back of the drive. There should be a diagram on the back
...drive to see the jumper pins and jumpers. Look on the label to see a diagram of the various pin settings, and select the correct Master/Slave/Cable Select Jumper Settings, based on how many Optical ...
...diagram for it on the drive, you might have to switch the pin jumper to "cs" cable select or "slave" usually master is for the hard drive. If that didnt do it then while the computer is booting hit ...
76 questions posted
Usually answered in minutes!
17 Questions
6 Questions
3 Questions
3 Questions