Konica Minolta bizhub 350 All-In-One Laser Printer "tray 2 lifting mean" Questions

...tray 2 is not lifting the paper up to the feed rollers.pull the paper out of the tray and make sure it is not folded up the side of the stack if it looks ok then you may have a failed lift motor or ...

tray 2 and is everything ok, but i still receiving this message and i cannot print. Please any help? C0204 as I see you already know is a tray 2 elevator failure. Meaning the machine does not see tray

...Tray 2 Elevator failure - The Lift-Up Sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started. 1. Turn OFF the Main Power Switch.2. Turn Main ...

Tray 2 Vertical Transport Motor has turned for a given number of pulses after the sequence to move the Paper Lifting Plate from the standby position to the feed position was started. ? The Bypass Lift

...tray 2 paper lift failed take the paper out and make sure it is not folde or bent in a way that would cause it to not be lifted up to the feed rollersif it looks fine then you may have a failed lift ...

...tray #2. You will not be able to use your tray #2 until it's fixed. You can check it, sometimes there's just paper clogged at the rear of the paper tray. Remove your 2nd tray to see if there is a ...

tray 1 & 2 are no more working; how can i get it replacement or get repaired? Thanks Hello; if you have tray 3 and it working fine, then exchange with tray 1, if working that's mean the senser

...tray 2 is not lifting the paper properly. Most often this is caused by the tray being loaded improperly. So to try and fix this I would open tray 2 and check the loading of the paper and correct if ...

...tray 2 pre feed sensor". You say that you " tried changing Rollers,and all the sensors". I'm confused, does that mean that you tried and couldn't change the sensors. You could also have a bad paper ...

...tray #2. You may check the tray. Sometimes there's just a paper clogged at the rear of the paper tray. Just remove the 2nd tray to see if there is a paper clogged inside. Otherwise the cover/case of ...