Question about Konica Minolta bizhub Office Equipment & Supplies
...by the main switch located in the front door. Unplug the machine for 10-15 seconds then reconnect and turn on. If the code comes back you may need to call a service technician me salio ese error ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...10 seconds, and turn it on. Error must be gone. C3821: Fusing abnormally low temperature detection (heating side) cant find the other code. check that fu is installed correctly, check that right door ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...code comes back do not reset, you are messing with the Fuser the Hot part. Continuing to reset without a technician looking at and or replacing it, the fuser can catch on fire and that would ruin a ...
...theutility button and touch the trouble reset button then turn the main switch back off and wait at least 10 seconds then turn it back on if the error code comes back have the fuser unit ...
...code comes back do not reset, you are messing with the Fuser the Hot part. Continuing to reset without a technician looking at and or replacing it, the fuser can catch on fire and that would ruin a ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...10 seconds after and check if the machine starts correctly. If error code returns a technician is needed to replace fuser section. Call local dealer with error code and tell them to make sure a tech ...
...code should now be cleared. 5. Just Turn off the Main Power Switch wait at least 10 seconds....and turn it on. Make sure that the machine properly starts. ** If it re-displays the code again within a ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...utility buton) after fue second u will see trouble reset touch under u will see ok switch-off machine wait 10 sec and switch on If the error code still is on the machine u have to change cyan ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...trouble reset appears on screen. select it and ok should apper under it. power down machine for atleast 10 sec and turn machine back on. How to remove error Code C2211 from konina minolta bizhub ...
...a different code.... IF it says OK, you should be good to go. 5. Just Turn off the Main Power Switch and turn it on again more than 10 seconds after, and make sure that the machine properly
305 questions posted
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
256 Questions
111 Questions