Konica Minolta DiMAGE Z6 Digital Camera "zoom not working" Questions

Is the DiMAGE A1 equipped with detail zoom function? Yes, the camera features x2 digital zoom. (Digital zoom does not work in RAW setting) When operate the digital zoom, the imaged size will be ...

...zoom mode. When camera is switched off the lens does not retract. Lens motor seems to be working but not at correct time. Any helpful advice would be much appreciated. I have the same problem. The ...

...trying move. pushing on lenses doesn't work. The S0042 error code relates to a problem with the zooming mechanism (lens would not retract or extended) Press the power button on and hold it down ...

...zoom started working again. Weird but works. After reading this thread it seems to occur after a time of none usage. I fix my minolta z3, zoom was stacked, and after a few months looking for a best ...

...working fine since. The S0042 error code relates to a problem with the zooming mechanism (lens would not retract or extended) Press the power button on and hold it down while extending and twisting ...

...to MF (manual focus). The focus ring is an electronic one rather than a physical control like the zoom ring, so the response can seem slow. 2 Go into the camera menu and enable DMF (Direct Manual ...

...lenses to controller board - it is poorly manufactured probably too short (extra stress at endo of zoom). I tried to repair it - by soldering to repair damaged part, see some photos there: ...

...to buy what they sell on the ship. Every picture I take with it turns out white except if I use the zoom. Then they're ok but I can't always zoom. I tried to change the settings and return to the ...

...I press the ON button, in either of the 3 modes (camera viewer, camera LCD or playback LCD) the zoom lens zooms out and then back in (as it should) but then shuts off automatically. None of the ...

...working with 1mm screws, you'd better go with the parts to a camera repair shop and explain them the problem. The second solution is un-elegant but useful: If you disconnect the anti-shake circuit ...